BW Technologies GasAlert Extreme Manual download pdf (Page 11)

GasAlert Extreme

User Options Menu

To access the user options menu, press and hold E and D

simultaneously until the display reads OPTN.

To scroll through the options, press

E or D. Press C to

select the option. The following are the available user options:

1. EXIT: Exits the user options menu.

2. CLCK: Adjust the date and time of the detector.

3. PASS: Enable or disable pass code protection.

4. STLH: Enable or disable stealth mode. (The vibrator

alarm is disabled at -20°C.)

5. BKLT: Enable or disable the automatic backlight

function. (When stealth mode is enabled, this option is

not available.)

6. LTCH: Enable or disable the latching alarm function.

7. ACAL: Enable or disable automatic oxygen calibration at

startup. (Only available in the GasAlert Extreme oxygen

detector.)

8. PAST: Enable or disable automatic shutdown if

calibration is past due (at startup).

9. PORT, ESPA, DEUT, FRAN, or ENGL: Enables the

display’s language in the user’s choice of Portuguese,

Spanish, German, French, or English. (Only applicable to

detectors with the multi-language feature.)

10. RATE: Adjust the datalogger sampling rate. (Only

applicable to detectors with the datalogger option.)

11. SEND: Transfers the datalogging/event logging

information from the detector to the PC. (Only applicable

to detectors with the datalogger option.)

Information can be sent in the following three ways:

EVNT: Sends all of the event logs.

LAST: Sends all of the datalogs since the last time they

were downloaded.

ALL: Sends all of the datalogs saved on the detector.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

BW Technologies GasAlert Extreme Manual Page 11