GasAlert Extreme
User Manual
12
The detector then automatically deactivates.
12. Bump Test Fail: If a previous bump test failed, the detector
beeps, vibrates, and BUMP FAIL displays:.
Press
C to acknowledge the alarm.
Note
Bump test the detector before continuing operation.
For information regarding bump tests, refer to the MicroDock ll
User Manual.
Self-Test Pass
If the detector passes the self-test, it enters normal operation. The LCD
displays the ambient gas reading.
The detector begins recording immediately. It records the
• maximum (MAX) gas exposure,
• the short-term exposure levels (STEL), and
• calculates the time-weighted average (TWA).
Self-Test Fail
If the detector fails the self-test, refer to Troubleshooting.
Comments to this Manuals